Metal roofs, shingle roofs and honest repairs for Pullman, WA homeowners. Family owned since 2002, and estimates are always free.
Metal roofing is our specialty, but shingles, gutters, soffit and leak work all get the same attention in Pullman.
If two other people have caulked it and it still leaks, call us. Most stubborn leaks turn out to be flashing, a valley, or a fastener nobody thought to check.
Hard wind lifts shingles and works panel fasteners loose along the edges, which is exactly where the next storm gets underneath. We refasten, replace and reseal.
This is the work our name is attached to. Two decades of tin roofs on houses, churches, barns and additions, installed by crews who cut the trim on site instead of forcing something that almost fits.
Low slope roofs fail at the joints and around anything that sticks through them. That is where we start, not out in the middle of the field.
A replacement is a big spend and it should feel orderly. We schedule around dry weather, work in the right order, and never leave a house open overnight.
A shingle repair should not be visible from the street. We match as close as the weathering allows and blend the new work into the old.
Coatings for low slope and older metal roofs that are still sound but weathered. Washed down, refastened, primed at the rust, then coated.
Old skylights leak at the flashing long before the glass ever fails. We reflash, reseal, or set a new unit and tie it in properly.
Small repairs get the same crew and the same care as a full roof. Free estimate, a price in writing, and the work done before the next rain moves in.
The edge of a roof is where most trouble starts. New fascia, new soffit, wrapped or painted so it stays sound.
Guards installed as part of a roof job or on their own. Either way we check the hangers and the pitch while we are up there.
Removing the ice is the easy half. We also look at ventilation and insulation so it stops happening every January.
After a storm we walk the roof, photograph everything we find, and write an itemized estimate you can hand straight to your adjuster.
A limb through the roof or panels peeled back overnight needs covering now, not next week. We get it dried in first so the inside of the house stops taking damage.
Repair or replace, we handle both, and we work from what the roof actually needs rather than from what an adjuster might approve.
A careful walk over the whole roof — panels, shingles, valleys, flashing, fasteners — plus the attic side when there is a way in. You get photos and a straight answer.
A twenty year old panel roof usually needs fasteners and sealant, not replacement. We refasten with new washers and get you another long stretch out of it.
Slate and tile take patience and matching pieces. We replace broken and slipped units and rework the flashing they hide.
Waterproofing details on additions, porches and low slope tie ins, where two roofs meet and most leaks quietly begin.
Churches, shops, barns and small commercial buildings. We have roofed everything from a wood shed to a steeple.
A metal roof is the thing we do best. Our family has been installing them out of Morganton, North Carolina since 2002, and our crews bring that same work to Pullman: standing seam, exposed fastener panels, and ridge and valley trim that fits instead of being forced.
Shingles still make sense on a lot of Pullman houses, and we will say so when they do. What we will not do is talk you into metal when your budget or your roof does not call for it. Estimates are free either way.
Here is what Pullman homeowners tell us makes the difference.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
Somebody comes out, measures, gets on the roof, and leaves you a written price. No charge, no obligation, and no number that expires if you do not sign today.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
Beds get covered, tear off gets hauled as we go, and a magnet goes over the drive before we pull out. Your yard should look like we were never there.
Standing seam and metal panel roofs are the work we are known for. Color, trim, fastening pattern — we have done hundreds and we will walk you through all of it.
The questions that come up on just about every estimate we write.
Sometimes. If the decking is sound and there is only one layer of shingles, a Pullman metal roof can go over the top on purlins. If there is rot underneath or two layers already on, we tear off first — and we will tell you that before you sign, not halfway through.
Often, yes. Plenty of the Pullman roofs we get called to look at need flashing reworked or a section refastened, not a whole new roof. We will tell you honestly which one you are looking at, and if it is repairable we would rather repair it.
Most Pullman metal roof jobs land somewhere between about $12,000 and $30,000 in 2026, depending on square footage, pitch, panel type and how much tear off there is. Standing seam runs higher than exposed fastener panels. We measure before we quote, and the estimate is free.
Much less than people expect. Over solid decking with underlayment under it, a Pullman metal roof sounds about like a shingle roof from inside the house. The loud tin roof people remember was screwed straight to open purlins over a barn with nothing underneath.
We do. After a storm we photograph the damage on your Pullman roof and write an itemized estimate you can hand to your adjuster. We do not file the claim for you and we will not promise you what an adjuster is going to approve — that is their call, not ours.
That is most of what leak work is. Water runs along decking and rafters before it ever drips, so the stain on your Pullman ceiling is rarely under the actual hole. We work back to the real entry point, fix that, and check the rest of the roof while we are up there.
Honest words from customers who trusted Roofing Brothers with their roof.
"Roofing Brothers do excellent work. They've completed several projects for me and every time the quality has been top notch. They're reliable and take pride in what they do. I highly recommend them!"
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Old slate roof and I was afraid nobody would touch it. They matched the pieces and now you cannot tell which ones are new."
Our crews cover the surrounding area, not only the city limits.